Omega 7 Columbia Helicarrier MkIV

Thanks, guys. It means a lot.

Final update time on the Columbia build

Gave the bottoms of most of the aircraft a coat of Vallejo grey primer
BSC-2014-Helicarrier-78.jpg

Followed that by flipping them all over and goiving the tops a coat of Vallejo dark grey primer.
SHIELD 616 was given an overall coat of the dark grey primer
BSC-2014-Helicarrier-79.jpg
BSC-2014-Helicarrier-80.jpg

All of the Omega 7 aircraft were then given a coat of Testors Graphite Dust on the upper side
SHIELD 616 was given an overall coat of the same color, but that was followed by a coat of flat to tone it down
BSC-2014-Helicarrier-81.jpg
BSC-2014-Helicarrier-82.jpg

The quinjets had their cockpits painted in with metallic light blue, and had "Omega 7" logos drawn in on the wings.
Their exhausts were touched with a black wash.
SHIELD 616 had her cockpit windows painted in with the same metallic blue, and I also added the skylight from Colson's office
BSC-2014-Helicarrier-86.jpg

For the F-35s and F-23s, I opted not to draw on the wing logos due to size.
Their cockpits were painted in with metallic light blue, and their exhausts were touched with a black wash
BSC-2014-Helicarrier-87.jpg
BSC-2014-Helicarrier-88.jpg

Using a light black wash, I painted in the lines for the deck elevators and catapults, as well as framing in the catapult blast shields
BSC-2014-Helicarrier-83.jpg

Using a similar technique, I went to the bottom of the hull and painted in the impression of section/panel lines.
I also added some vertical detail lines to the hoverfan housings
BSC-2014-Helicarrier-84.jpg

With that ready, I printed out decals for my runway and for the various "Omega 7" logos that would mark the ship
BSC-2014-Helicarrier-85.jpg

The ship was given a gloss coat for decal application, followed by a flat coat to tone it all down.
Using the black wash, I went in and repainted the elevator and catapult lines that had been covered by decals.
Throughout various locations, I added some defensive weaponry that I picked up from Shapeways for the ship.
Once all of that was done, the air wing was glued into position

Finished build pics:
BSC-2014-Helicarrier-89.jpg

BSC-2014-Helicarrier-90.jpg
BSC-2014-Helicarrier-91.jpg

BSC-2014-Helicarrier-92.jpg

BSC-2014-Helicarrier-93.jpg
BSC-2014-Helicarrier-94.jpg
BSC-2014-Helicarrier-95.jpg

BSC-2014-Helicarrier-96.jpg

BSC-2014-Helicarrier-97.jpg

BSC-2014-Helicarrier-98.jpg

BSC-2014-Helicarrier-99.jpg

BSC-2014-Helicarrier-99a.jpg


Youtube link:
http://www.youtube.com/watch?v=M-nXdcJax2o

All in all, I am VERY happy with how this one turned out
 

Latest posts

Back
Top