Getting back into aircraft modeling leading up to an end project
- Thread starter swimmingrod
- Start date
Eagle-1
Well-Known Member
- Joined
- Jan 16, 2014
- Messages
- 1,142
Alrighty P-man, according to Scalemates, this 2015 release is the latest release, so we should get maximum garbage right outta the box with this version. If they've gotten worse with every release, this should be the worserest.
I'm picking that kit up ASAP. If you're joining me, keep me posted.
Rob.
Eagle-1
Well-Known Member
- Joined
- Jan 16, 2014
- Messages
- 1,142
Yep, I think the consensus is, no matter where it comes from it's bad, so that's good for me. I've just bought the very latest (that I'm aware) release just like the one pictured in my last post and a spank brand new hammer.
Pick up one Edbert and join me and Pantherman into the spider's web.
Rob.
Last edited:
Mine is on order, should be here in a week or so. That will give me time to finish my DDay build. Pantherman
swimmingrod
Member
- Joined
- May 18, 2024
- Messages
- 14
Ill join in on the fun, count me in!
the Baron
Ich bin ja, Herr, in Deiner Macht
Welcome to the Herd, Swimmingrod!
If you want to build the Monogram P-61 (not Revell, regardless of the logo on the box), then look for an old boxing, as others have suggested. The "white box" boxing was the first, back in the mid-70s. The box was overall white, with a photo of the built model on the lid. It included Shep Paine's "Tips on Building Dioramas" brochure, featuring the diorama Shep built with the Black Widow (see the brochure here).
Black Sheep mentioned this: over the years, and through subsequent releases, and merger with Revell, the molds have worn. More recent releases are more likely to have fit issues, flash, etc.
It's not a bad kit, but I would buy the older release off the secondary market, eg, eBay, at shows, at club meetings, than the latest release.
That goes for pretty much any kit released by Monogram, too. I build Monogram, and Revell, which were the brands I built as a kid (I was born in 1964). But I buy older boxings on the second-hand market. I don't care if the kit includes the decals, either, and I have gotten away without instructions. Bagged kits are fine; as long as all the parts are there, I'm happy. But the older boxings were popped when the molds were still relatively new.
To return to your original question about a 737 kit, I'm afraid I can't really help, because I don't build airliners, or jets, really. I haven't built an airliner since I was a kid, an Aurora Boeing 727. I couldn't even say, off the top of my head, who today makes airliners, but I do know that there are kits on the market.
Someone else mentioned Scalemates, which is a scale modeling database in wiki form. It's very useful, a lot of good info there, though it's all member-driven. That is, what's there is there because someone added the info. So you might not find something, but there is a ton of info there. I'd visit Scalemates and search on "boeing 737" as a start. From there, you could search online for vendors who carry any kit you find.
Hope that helps!
Best regards,
Brad
If you want to build the Monogram P-61 (not Revell, regardless of the logo on the box), then look for an old boxing, as others have suggested. The "white box" boxing was the first, back in the mid-70s. The box was overall white, with a photo of the built model on the lid. It included Shep Paine's "Tips on Building Dioramas" brochure, featuring the diorama Shep built with the Black Widow (see the brochure here).
Black Sheep mentioned this: over the years, and through subsequent releases, and merger with Revell, the molds have worn. More recent releases are more likely to have fit issues, flash, etc.
It's not a bad kit, but I would buy the older release off the secondary market, eg, eBay, at shows, at club meetings, than the latest release.
That goes for pretty much any kit released by Monogram, too. I build Monogram, and Revell, which were the brands I built as a kid (I was born in 1964). But I buy older boxings on the second-hand market. I don't care if the kit includes the decals, either, and I have gotten away without instructions. Bagged kits are fine; as long as all the parts are there, I'm happy. But the older boxings were popped when the molds were still relatively new.
To return to your original question about a 737 kit, I'm afraid I can't really help, because I don't build airliners, or jets, really. I haven't built an airliner since I was a kid, an Aurora Boeing 727. I couldn't even say, off the top of my head, who today makes airliners, but I do know that there are kits on the market.
Someone else mentioned Scalemates, which is a scale modeling database in wiki form. It's very useful, a lot of good info there, though it's all member-driven. That is, what's there is there because someone added the info. So you might not find something, but there is a ton of info there. I'd visit Scalemates and search on "boeing 737" as a start. From there, you could search online for vendors who carry any kit you find.
Hope that helps!
Best regards,
Brad
Last edited:
The more the merrier. Pantherman
Think we might need to start a new thread if this is a group build?
Maybe something like pain or pleasure P61 ?
Or who will drop the hammer on a P61 ?
Pantherman
swimmingrod
Member
- Joined
- May 18, 2024
- Messages
- 14
Hey Brad,
Thanks for the warm welcome.
I have a model in mind and a decal set I may use. I kind of wanted to buy two models, one to try decals and one to try air brushing.
The 737 models I have an eye on:
https://spruebrothers.com/bpk72019-1-72-big-planes-kits-737-800-klm/
https://spruebrothers.com/bpk72018-1-72-big-planes-kits-737-800-qantas/
The decal set:
https://www.airlinedecals.com/southwest-airlines
BlackSheepTwoOneFour
Well-Known Member
- Joined
- Jun 9, 2013
- Messages
- 1,026
What a waste of money…
BlackSheepTwoOneFour
Well-Known Member
- Joined
- Jun 9, 2013
- Messages
- 1,026
Big bucks for a 1/72 scale airliner. Just as bad as1/350 scale ship kits only more expensive.
My advice… get a cheap aircraft kit to practice your airbrushing, not on a $100 plus kit.
swimmingrod
Member
- Joined
- May 18, 2024
- Messages
- 14
I am also considering 1/144 scaled models but I just to look into it
Eagle-1
Well-Known Member
- Joined
- Jan 16, 2014
- Messages
- 1,142
Yes sir, me too!
This may sound like a lie, but, I even made sure it was in a racked box so hopefully some of the parts will be broken along with any flaws from the molds. Seems as though we've got our choice for $25 bucks.
Of course! Now, since you aren't 100% on your confidence yet, I would say you don't have to get this REVELL P-61. Like "The Baron" said, if you just want a P-61, choose another if you're unsure. Any kits, as you mentioned, will be practice, so grab one and join all up in here with us. Certainly, grab the same one we wanna try if you like. Ultimately, regardless of what you may hear, buy any kit you want to. Practice on a BANDAI Perfect Grade Millennium Falcon if you want to.
OK, Hold up here??? Are you saying this is a horrible idea, a bad kit and that we shouldn't do this? I wish I had seen something about that earlier? Man. Regerts.
We've got 3 who admit to wanting to try this, so I believe we now qualify as a group? I'm doing it regardless and will be delighted for the company!
A good thread title is critical, but yes it should be re-located in my opinion. swimmingrod has been welcomed. He's part of the crew now so we can let his Introduction thread return to normal?
Rob.
Last edited:
smokeriderdon
Well-Known Member
Hmmmm. I built this back in the day. It wasdnt the best thing I have touched, if memory serves, but not the worst. Id be curious as to how bad its gotten over the years of producing over and over. I have too much on my plate for the near future to join in the fun, but I may snag one and give it a go later just to see.
Eagle-1
Well-Known Member
- Joined
- Jan 16, 2014
- Messages
- 1,142
You are certainly welcome. We'll drag in a chair from off the porch if'n we gotta.
Rob.
I have the Hobby Boss 1/48 P-61C Black Widow. If I had more time I would join you guys but I will have to miss this one.
We sometimes need to embrace the madness.... Pantherman
Ok all concerned, how about I start a thread called. Revell P61, waiting for the hammer to fall !!
Are we all happy with that? Pantherman
Jim62
Well-Known Member
Welcome aboard and when you get to the 737 it should come with missing parts or parts that don't properly fit together, at least if it is an actual depiction of a Boeing Airliner.
And once it's built parts may fall off of it.Welcome aboard and when you get to the 737 it should come with missing parts or parts that don't properly fit together, at least if it is an actual depiction of a Boeing Airliner.
Hi swimmingrod, sort of barged in on your thread so I have started a new one regarding the revell black widow. Sorry about that. Pantherman
Eagle-1
Well-Known Member
- Joined
- Jan 16, 2014
- Messages
- 1,142
Welcome aboard and when you get to the 737 it should come with missing parts or parts that don't properly fit together, at least if it is an actual depiction of a Boeing Airliner.
AND two more for the "died suddenly and there is no explanation" pile.
Rob.
Last edited:
Eagle-1
Well-Known Member
- Joined
- Jan 16, 2014
- Messages
- 1,142
Subscribed! I'm itchin' to see y'all try this thing. Warnings have been issued and it's OBVIOUS there are hard headed folks everywhere.
https://www.scalemodeladdict.com/th...ing-for-the-hammer-to-fall.15525/#post-230622
Rob.
swimmingrod
Member
- Joined
- May 18, 2024
- Messages
- 14
its fine, Im glad there is an active community around modeling!
Edbert
Well-Known Member
- Joined
- May 16, 2024
- Messages
- 3,151
I joined after you. Same reason, the people here are active and great humans!
Edbert
Well-Known Member
- Joined
- May 16, 2024
- Messages
- 3,151
I'm trying to learn how to use paint without "Testors" .
Rather...learning to use my antique collection of paint and kits with modern glues (99% of my experience, and I was really good, was with lead-tubed goo from, yeah, Testors) and the entire concept of non-toxicity!
I'm trying...this is from today, a layer of 1500, with some enamel (yeah Testors) chrome on high-wear areas, and a layer of the wife's hairspray. (my first time to ever even try this chipping thing).
I've done most of the white and light blue. Both colors unfinished. But I'm afraid of my my dark blue and need help...
https://www.scalemodeladdict.com/threads/tamiya-paint-question-xf-17-xf-8.15529/
Last edited:
