Jagdpanzer E-100 "kitbash" help

Pociumbelul

New Member
Joined
Nov 21, 2023
Messages
4
Hello there!

I am currently building a Jagdpanzer E-100 1/35 scale model and I wish to "kitbash" it into having a look similar to a skin from World of Tanks.
Unfortunately I was not able to find any industrial walkway or any industrial handrails that are 1/35 scale to put them around the casemate. I will leave some screenshots of what I would require.

Can anyone help me with some suggestions?

Cheers!

3cc5afa19c92683685aaf480ac7bedca.png

maxresdefault.jpg

JAGDPANZAJPG.JPG
 
Build the frame out of styrene rod .
Easiest way is to draw it out and lay that under some translucent parchment paper , wax paper or tracing paper held taught so you can see the drawing ( tape / thumbtacks ), then glue it up over that layout using thin solvent cement .

Add one of those PE mesh to the inside , bonded with super glue .
 
Last edited:
Build the frame out of styrene rod .
Easiest way is to draw it out and lay that under some translucent parchment , paper wax paper or tracing paper held taught so you can see the drawing ( tape / thumbtacks ), then glue it up over that layout using thin solvent cement .

Add one of those PE mesh to the inside , bonded with super glue .
That sounds great, I shall acquire some styrene rods and I shall buy some mesh from the Hobby Link Japan. Thanks a bunch for the info and tips!
 
Any questions you might have when you get started , don't hesitate to ask .
 
Back
Top