VF-1 Valkyrie and VF-1 Super Valkyrie 1:72 from Robotech (Macross)

Started on the diorama for these two fighters. First one will be as in the intro of the series. I want to 3D print the parts and then paint them.
69008727_164873568012109_8993942455929798656_n.jpg68872768_164873574678775_2741467149611565056_n.jpg
 
Thanks, but, I see some thinks to improve the next time. This plane is just to small to make it perfect
 
I have the other two modes as well. But these two took way to long. Need to build some other models first.
 
Finished the hanger elevator for displaying my fighter. Still need to print some parts.
0001.png
0002.png
0003.png
0004.png
0005.png
74693236_567645184041964_8092314080448086016_n.png
 
Last edited:
So very cool! I started lighting the Imai/Bandai VF-1J Valkyrie a couple of years ago, but it's become a shelf queen.

FYI: that's a Super Valkyrie with the standard fastpack. The Strike Valkyrie has the two cannons on the starboard pod, and unless I'm mistaken, this was featured only in the DYRL movie and not the TV show.
 
So I finished the elevator
z15-10 topa.jpgaIMG_6485.JPG
aIMG_6487.JPGaIMG_6486.JPGaIMG_6489.JPGaIMG_6490.JPGaIMG_6494.JPGaIMG_6495.JPGaIMG_6496.JPGaIMG_6497.JPG

Set1 - Macross SDF-1 Prometheus Hanger elevator 1-72 scale
This iconic model is straight from the Macross intro. Modelled using the series intro as reference and using real air plane carrier parts for the under side. This kit consists of 177 parts that need to be 3D printed.
Model can be downloaded here:
https://www.cgtrader.com/3d-print-m...s-sdf-1-prometheus-hanger-elevator-1-72-scaleCreated at 1:72 scale for the same size as the VF-1 Valkyrie. (plane and figures not included)
Set is 29,4 cm wide, 14,5cm heigh and 28cm deep.
It can be printed at any other scale of course.

Kit contains
- Blender file for reference
- With finished coloured model.
- Exploded view of all the parts
- Building instructions
- BOM (showing all the print files, and number of printers per item needed)
- Assembly instructions
- Paint instructions
- STL, OBJ and 3MF files of all parts
- Decals for the letters of the hanger doors

This Kit is part of a larger set, these will be available shortly
If you send me a message I will send you the build instructions for free, so you can see what you need to create this set.
 

Latest posts

Back
Top