HIMMELSFALKE --- Ma.K. Falke XL

urumomo

Well-Known Member
I started this back in February but haven't done any scale work since March .
Decided to make this WIP the one to get back to the bench .

She's a stretched Ma.K. Falke with the rotary cannon replaced with a high power laser module for satellite and ICBM shoot-down

About to start shaping the Aves on the right side to match that intake to the left one .






Work back in February :

 

urumomo

Well-Known Member




Once the angles were established , 2 resin copies were made .
Same casting used for both sides , just rotated end-to-end and the fore and aft sections cut to the proper length , miter and bevel .



 
Last edited:

urumomo

Well-Known Member




Establishing forward section of the fuselage that will accept the laser package






Really needed some slow-set resin for these slender pours but the bubbles could be dealt with here



 
Last edited:

Belugawrx

Active Member
Woah...this is alot to catch up on U....
Tell me you stopped smokin cigrits, and these are your collection of lighters...
Keep this going !
 

urumomo

Well-Known Member
Still smoking my favorite Camel 99's ... . Though I haven't drank in 5 years now -- This planet is too annoying to quit everything ;)

Always save your plastic shapes ! :

 

Latest posts

Top