HIMMELSFALKE --- Ma.K. Falke XL

urumomo

Well-Known Member
Joined
Mar 18, 2013
Messages
5,931
I started this back in February but haven't done any scale work since March .
Decided to make this WIP the one to get back to the bench .

She's a stretched Ma.K. Falke with the rotary cannon replaced with a high power laser module for satellite and ICBM shoot-down

About to start shaping the Aves on the right side to match that intake to the left one .

XhqHIIq.jpg





Work back in February :

CKVBFAF.jpgOyVSiGe.jpgVY6XArs.jpgR0V1Kyt.jpg9HedX0V.jpgbZeq7YZ.jpg
nSmGniZ.jpg
 
QzCnHwz.jpg



Once the angles were established , 2 resin copies were made .
Same casting used for both sides , just rotated end-to-end and the fore and aft sections cut to the proper length , miter and bevel .



mOCaxRP.jpgt64MoOh.jpghb3W02S.jpgw9ebuXq.jpg
 
Last edited:
ZiMptNi.jpg




Establishing forward section of the fuselage that will accept the laser package



va0gdbV.jpg
o5UHqWp.jpg
FJ8QNyI.jpg



Really needed some slow-set resin for these slender pours but the bubbles could be dealt with here



JLzKTI9.jpg
c9C3nvV.jpg
NMKwIJ3.jpg
IBATrWU.jpg
ARj9DQS.jpg
 
Last edited:
Woah...this is alot to catch up on U....
Tell me you stopped smokin cigrits, and these are your collection of lighters...
Keep this going !
 

Latest posts

Back
Top