M6 Gun Motor Carriage WC-55 2025-06

[BarleyBop]

...so the 'quick-build' Pavesi hit a snag (while I wait for a part), and I really wanted to build something that wouldn't take months...
So ta-da!
Checked the stash and this should fit the bill.
I've already built the Weapons Carrier 52, so I'm thinking this should not be too scary.


As part of Operation Torch, the US and Brits have landed in the northwest of Africa, and after some skirmishes with the Vichy French in Morocco and Algeria, the French have come onside and the Axis forces are now caught in a pincer with Monty advancing from the east.

The Americans will now have their first encounters with the combined German and Italian forces as they press into Tunisia.

 

[BarleyBop]

A little less complex than the Scammell!

 

[Rimmer]

Another really interesting subject - looking forward to seeing it come together.

 

[BarleyBop]

Not going to record all the issues with seams, injection marks and flash as I go; just a few pics so you can know what to expect with this kit.


Granted, the frame will be under the truck.
The overall quality, m'eh. Look at the muffler and tail pipe. Misaligned halves, pin marks, seam, and a rounded tail pipe end!


...after an hour of futzing, a bit better.
I'm not going to sweat it too much though , this is supposed to be a quick build!

 

[BarleyBop]

Step 1

 

[Jakko]

Not too surprising, of course — this kit is 50 years old, give or take. If you want a better WC-50-series kit, probably the best choice right now would be the recent Zvezda one, but if you then graft the 37 mm gun onto that it will probably look crude.

 

[BarleyBop]

Not too surprising, of course — this kit is 50 years old,

Ha!
Wait a minute, 50 years ago I was already 16!

 

[BarleyBop]

Steps 2 and 3



I've prepped for steps 4 and 5, some decisions to make soon, and some primer as well.
One of my earlier research photos when building the WC52, was of this vehicle in Tunisia with an extra 30cal mounted beside the right passenger seat. So I've gone through my accessories stash and found some likely candidates, as well as PE American fuel can holders.



I've seen other modeler's version of this configuration, and I'd love to try it too. Check out all the kit on the gun shield!

 

[kevin]

Pretty cool pics, are you going to paint that camo pattern as well?

 

[Jakko]

I probably would The camouflage is mud, BTW. Just some local dust mixed with water and smeared onto the vehicle. To get the colour right, work out where (approximately) the photo was taken and research local soil colours.

 

[BarleyBop]

Pretty cool pics, are you going to paint that camo pattern as well?

local dust mixed with water

Yup, will give 'er a try!
This was the build I was referring to at some point, and now the reference eludes me, but I had read of crews mixing gasoline and dirt. Makes sense in an arid area...

 

[BarleyBop]

Ya, ya, I said I wouldn't and I am: posting about kit quality.
In this instance, however, it isn't to gripe about the quality, but to touch on how we, as modelers, get these lumps of plastic past the point of looking like lumps of plastic.
One of the surest ways is precisely to remove the visual artifacts of the fabrication process.

Here is the grille, out of the box:


Now with a shave and a haircut:


... granted, not perfect, too thick for scale, but to my eyes, so glad I picked at it for a while.

 

[BarleyBop]

Ha!
I guess you can't see everything at once, when there is so much to see!
In my Topolino build, we spent some time pondering the utility of what turned out to be a dash light.
I never noticed them in this photo I had referenced during my BEEP build.

Dug it up as the kit has the brake, clutch and accelerator molded almost flush with the firewall.



Looks like the dash is also in line for some sprucing up.

 

[BarleyBop]

Puzzle:
I've not had any luck finding out with any degree of certainty what the markings were early in the war, of US gerrycans used for water.

Painted all white
A white X
The word 'WATER'
Other?

Of course, a photo in Tunisia would be tops!

For now, I have a white can, but it would be easy to paint a white X in the indentation of a regular OD can.

 

[BarleyBop]

Some progress

 

[Jakko]

I've not had any luck finding out with any degree of certainty what the markings were early in the war, of US gerrycans used for water.

None, most likely. American water-jerrycans had a different lid than the ones used for fuel.

Fuel can:


Water can:


That is, the fuel can had a screw lid that came off entirely, the water can had a flip-up lid that remained attached to the can.

Asuka has a set of American jerrycans that includes both:

 

[BarleyBop]

Haha, I guess I must have known that when I assembled my fuel can depot several years ago... I had a mini project assembling British, American, German and Italian cans of all types... for some reason, painted the water cans white.

And the Asuka definitely looks familiar. Probably had collected a set at one point.



I think the British would have done it more consistently... maybe I was on a roll with the white paint one night!

More recently I know I have seen the white X in a photo, perhaps in the Pacific theater? In any case, that was likely a random occurrence, not dictated by policy.

 

[Jakko]

British water cans usually had the word WATER painted on or stamped into them, yes. German water cans had WASSER stamped into the metal and normally had a white cross painted onto both sides of the can to make their contents much more obvious.

 

[BarleyBop]

Metal to the pedal!

Some scratch pedals. Punch strikes again!

 

[BarleyBop]

... so I found some leftover PE from the BEEP build... BONUS!

The hard part is scooping out the plastic blobs for tie-down hooks, because they are at the bottom of bowls...
First two done, four more to go...
Turns out the fiberglass brush pen was well suited to cleaning up the bottom of the bowl after some careful scraping.



...so how do I keep finding stuff to use?

NEVER throw anything away
Organise the stuff, at least a little bit
Know your stash to recognize good accessories when you see them on sale or at the LHS
Collect and revisit reference photos when a build is on deck
... and in my case, having a 'narrower' focus: North Africa, softskin (now some armour); that really helps!