What do you get when you cross a ................. (Warning This thread may contain graphic images of a Kit Bash)

You know with a little Nanolaminate Armor for R2, lasers would just split and reflect right off his dome piece. :p
That COULD be an opportunity for a Pearlescent paint on R2, lol. If you so choose.


Fair warning this cartoon contains adult themes! This clip specifically has males without shirts and child soldiers in it (albeit piloting mechs)
But it also shows Nanolaminate Armor splitting a high-powered beam weapon! (lots of surrounding collateral damage from beams splitting too, again fair warning before viewing.)
 
**UPDATED 19-Jun... Flight Crew done.
 

Attachments

  • F111-Xwing_bash_022.jpg
    F111-Xwing_bash_022.jpg
    185.1 KB · Views: 13
  • F111-Xwing_bash_023.jpg
    F111-Xwing_bash_023.jpg
    136.2 KB · Views: 12
  • F111-Xwing_bash_024.jpg
    F111-Xwing_bash_024.jpg
    166.1 KB · Views: 11
  • F111-Xwing_bash_025.jpg
    F111-Xwing_bash_025.jpg
    177.9 KB · Views: 11
  • F111-Xwing_bash_026.jpg
    F111-Xwing_bash_026.jpg
    127 KB · Views: 14
  • F111-Xwing_bash_027.jpg
    F111-Xwing_bash_027.jpg
    222.6 KB · Views: 14
  • F111-Xwing_bash_028.jpg
    F111-Xwing_bash_028.jpg
    265.6 KB · Views: 15
  • F111-Xwing_bash_029.jpg
    F111-Xwing_bash_029.jpg
    281.2 KB · Views: 13
  • F111-Xwing_bash_030.jpg
    F111-Xwing_bash_030.jpg
    291.4 KB · Views: 14
The pictures are a little blurry but we get the idea. This is one of the most interesting projects that I have seen in a long time.
 
Started on some external piping / greebles.
Trying to use the existing lumps and bumps on the F-111 to attach them too or run them from/to.
 

Attachments

  • F111-Xwing_bash_031.jpg
    F111-Xwing_bash_031.jpg
    574.6 KB · Views: 11
  • F111-Xwing_bash_032.jpg
    F111-Xwing_bash_032.jpg
    269.8 KB · Views: 11
  • F111-Xwing_bash_033.jpg
    F111-Xwing_bash_033.jpg
    617.6 KB · Views: 11
  • F111-Xwing_bash_034.jpg
    F111-Xwing_bash_034.jpg
    387.4 KB · Views: 12
**UPDATE 05-July – Have started on the undercarriage.

I've decided to run with Millennium Falcon Undercarriage parts as the max take off weight of the F-111 is 92,500 lbs, and the little delicate X-Wing landing gear would crumple under the load.

Nose Undercarriage uses a single landing pad from a Millennium Falcon which has been trimmed (Cut & Shut) to accommodate the slightly narrower nose wheel well.

Main gear seen here in mock-up (not yet all glued up) using parts from the Falcons main gear. Funnily there are gaps in the molding that the F-111 stub axels fit right into. I will stabilize and fix with Araldite.

All in all I like the look of the gear, it's not that much lower than what the F-111 would sit with Tires, but just enough to make it look a little pimped out.
 

Attachments

  • F111-Xwing_bash_035.jpg
    F111-Xwing_bash_035.jpg
    254.1 KB · Views: 10
  • F111-Xwing_bash_036.jpg
    F111-Xwing_bash_036.jpg
    196.1 KB · Views: 7
  • F111-Xwing_bash_037.jpg
    F111-Xwing_bash_037.jpg
    221.3 KB · Views: 8
  • F111-Xwing_bash_038.jpg
    F111-Xwing_bash_038.jpg
    271.6 KB · Views: 8
  • F111-Xwing_bash_039.jpg
    F111-Xwing_bash_039.jpg
    292.1 KB · Views: 9
  • F111-Xwing_bash_040.jpg
    F111-Xwing_bash_040.jpg
    272.2 KB · Views: 9
  • F111-Xwing_bash_041.jpg
    F111-Xwing_bash_041.jpg
    269.8 KB · Views: 10
Well, it's been a slow couple of weeks.
That whole 'Work' thing again :(
Anyway, I've been tossing up what to do with the canopy
I went down the path of opening up the crew access doors.
Although I wasn't sure how to do this I used the hive mind on Facebook to come up with all manner of hairbrained ideas.

I finally went with the modelling clay and exacto knife option.
Used modeling clay to pack out the canopy. Started with a brand new Exacto blade, then realized I should stop drill the corners, continued with light pressure cuts and about 20 minutes later, hey presto.

[there was at least 2 run away blade cuts - you'll see 'em]

I'm pretty happy with the result, and a bonus - I didn't cut myself
 

Attachments

  • 20220718_121539.jpg
    20220718_121539.jpg
    255.1 KB · Views: 7
  • 20220718_121515.jpg
    20220718_121515.jpg
    186.2 KB · Views: 7
  • 20220718_121510.jpg
    20220718_121510.jpg
    155.4 KB · Views: 7
  • 20220718_112451.jpg
    20220718_112451.jpg
    187.7 KB · Views: 7
  • 20220718_110203.jpg
    20220718_110203.jpg
    195.7 KB · Views: 7
  • 20220718_110157.jpg
    20220718_110157.jpg
    207.6 KB · Views: 7
  • 20220717_154152.jpg
    20220717_154152.jpg
    493.4 KB · Views: 7
Painting is progressing. To do the camo scheme I wasn't able to get hold of any masking putty so I tried the Vallejo Liquid Mask.

Bit chunky in spots, should come up ok when the weathering is done.
 

Attachments

  • 20220805_175402.jpg
    20220805_175402.jpg
    153.6 KB · Views: 3
  • 20220805_174721.jpg
    20220805_174721.jpg
    284.9 KB · Views: 3
  • 20220805_174724.jpg
    20220805_174724.jpg
    292.6 KB · Views: 3
  • 20220805_174827.jpg
    20220805_174827.jpg
    288 KB · Views: 2
  • 20220805_174942.jpg
    20220805_174942.jpg
    308.9 KB · Views: 3

Latest posts

Back
Top