Well... the secondary hull is finally together. I wanted to get that done and over with before the break. The rear over the shuttlebay will need buttloads of filling, especially the very end of the overhang. It took ALOT OF PLANNING. And my GF had to help wrangle wires and help keep the bay door lined up.(due to the way I had to put the hull together and the wiring, I couldn't glue the door part in place till after the hull was together. The rear of the hull seems slightly smooshed vertically so you kind have to force it back into a circular shape by jockying the door piece into a groove in the inside, wedging it into the hull.)

Then I used the end piece with the guidance lights to make sure the door part was aligned right, then after tightly wrapping the main hull with tape to force the seams together I super glued the door part and end piece. Luckily even though I had to drip glue into the areas it wicked down into the right areas and there is no sign of it now. Whew.[ATTACH=full]88257[/ATTACH][ATTACH=full]88258[/ATTACH][ATTACH=full]88259[/ATTACH]