When setting up a work area, do you guys do everything from one basic work area or do you have different stations set up that you different stuff ? If so how many stations do you have set up and what do you do at each station. Right at the moment I have a main desk that I use as my work area. Then I have a row of stations coming off each side of the desk going backwards. I dont have a desired specification that I do at each station though and continue basically doing everything at the main desks work area. The only station I really do anything at other then the main work area is the one desk type station I do my painting at. However, that will be changing when I get my spray booth finished. The spray booth will be moving over to the dryer duct which is beside my sink.
So I will have about four stations along with my main work area at the desk. Right now this is how I have things set up. Im always open for suggestions to make things more organized and easier.
Desk - Main work area. Coming off the left side going backwards, I have another miniature desk with my styrofoam block holding the Alligator sticks to help holding parts for painting. Parts of the model that are painted and ready to assemble. Next station is a childs desk with all my paints on seperated by Acrylics vs Enamels. Other side coming back from the main work area is a stand that I have all my supplies (Glues, sandpapers, finishing cloths, etc in) and a stero on top. Next stand is where I currently paint, with my rubber gloves, index cards, tape, etc on the bottom with my solvents, lacquer thinner etc. Then I have a miniature stand that I have my micro sol, micro set, novus, clear coats etc that is set up for decaling.