the sand paper and I are one..

started work on the outer pod walls wet sanded with 4 progressively finer grit sand papers here are the parts after some extensive sanding check it..

side outer walls

[ATTACH=full]5152[/ATTACH]

front and rear outer walls

[ATTACH=full]5153[/ATTACH]

bottom hull, roof piece, and some scanner parts

[ATTACH=full]5154[/ATTACH]

Here is my usualy pre primer set up

[ATTACH=full]5155[/ATTACH]

fresh coat of tamiya surface primer

[ATTACH=full]5156[/ATTACH]