While I agree, the finish is not bad....and certainly better than some models I have painted,

the finish does have a lot of orange-peel which can easily be fixed at this stage

... if the glass isn't fixed, and the body not attached to the chassis.

If it is beyond that stage, then I say "great job" and I wish my current GT40 had this few issues.

Wet sanding with the paper I mentioned earlier can level out the paint and then with a coat of clear,

it will have a finish that better mimics a real car finish. With more work, it could even rival a show car finish.

This 1/24 Impala was painted with water based acrylics, then dusted with rattle can clear.

Then wet sanded smooth and cleared final with automotive clear.

(sorry I don't have bigger pics, these are old scans from 4x6 prints)

While being a bit too glossy to be realistic, the finish was almost dead smooth!

Cutting and polishing with compound would have perfected it, but I wasn't into that much effort with such a small scale paint job.

[ATTACH=full]116471[/ATTACH]

[ATTACH=full]116472[/ATTACH]

[ATTACH=full]116473[/ATTACH]