Re: Odysseus Twins

Quick update for today.

Went in ands fixed the corners of the pour on the top of the hull with a little bit of Aves Apoxie Sculpt

[ATTACH=full]8911[/ATTACH]

Now, for the last major mod of the stock hull.

I needed to add in the twin dual torpedo launchers to the saucer edge.

To do this, I measured out where the openings should be and notched them out.

That done, I levelled out the openings from behind with some Aves, then laid down the tubes using 1/16" brass tubing.

To secure the tubes, I laid down another little bit of Aves over the tops.

[ATTACH=full]8912[/ATTACH]

Mockup of how it will look from the front when closed up.

[ATTACH=full]8913[/ATTACH]

Youtube link:

Odysseus Twins-SMA Contest-Part 12