Star Wars - Jabba the hutt's throne room

The Swedish DR. Plastic

Pleas enter, the day has gone to hell any way.
Joined
Mar 10, 2014
Messages
185
My next project

1338210006866256450357.jpeg


Will be started on sometime in late august
 
ok as a prolong I will show you what i have done to the model so far.

The first thing was to inspect the flimsy bottom peace so it hadn't warped ore been damaged in any other way, luckily its was ok.
20130618_141201_zpsyyrl2yh8.jpg

Next I loosely fitted the walls and did a test fit.
20130618_141232_zps7mwxih1u.jpg

It was horrible.
20130618_141356_zpsfqb2v1cu.jpg

After a initial miss calculation.
20130618_141418_zpsyjyqgkx3.jpg

I started by gluing down the left wall section.
20130618_164505_zpsnab7nkav.jpg

To fix the to long wall section.
20130618_142627_zpsd5dhzkyb.jpg

I had to manhandle it a bit.
20130618_141308_zpsuxptxeuu.jpg

joined it together and glued it in to place.
20130619_165643_zpsai6gwbmq.jpg

Added the additional hallway section
20130619_103623_zpsheu7zgzz.jpg

And gave it a first coat of paint.
20130621_101606_zpsyujkghe5.jpg

And this is how it looks to day.
DSC_0521_zpskltv3wcr.jpg

To do list
Add additional walls behind Jabba and on the left wall to hang Solo.
Cover up seam lines.
Drill / file out the floor gratis
Texture the floor and walls and it should look fairly ok.
 
Hi guys wont be on her much until late august, I will however be doing some regular post on my Facebook page. So those that want to follow me there can go to https://www.facebook.com/opannes and ask to join my fremd list.
 
Hi guys, sorry for the late start. Felt a bitt gloomy after the vacation, so my creativity was drained for a bit. But i have slowly started up this build now after the summer, now if only the heat could give up things would be just dandy. Any way I should have something up in a few days, need to make the intro first.

Back in a few.
 
This first part is just me starting cleaning up the small figures, this one has a lot of silence. In the future i will try and remember to compress the times were i don't say much.

anyway here is the first video.

[youtube]https://youtu.be/Mq9nkIHpfq4[/youtube]
 
I feel the pain you're going thru with this kit... was probably one of the worst kits that MPC made in the Star Wars line. The base was really flimsy and about the only redeeming quality this had was the Han in carbonite figure that went perfectly with the Slave-1 they did. I'm sure you'll have fun working on it. Can't wait to see what you do with it! :)
 
LrdSatyr8 said:
I feel the pain you're going thru with this kit... was probably one of the worst kits that MPC made in the Star Wars line.

No the worst model is the troop transport you get whit the rebel base, yuck what a nightmare.
 
hi guys just a heads up, i might get snowed in on my Warhammer models relay bad once this one is finished. Got a ton of stuff i need to get finished, witch reminds me I got two made over the summer and they will be up in the FIGURES & WAR GAMING MINIS right after this post. 8)
 
So in this episode I start work on Jabba himself, as well as doing some corrections to the part he sits on.

[youtube]https://youtu.be/G9oZ_3O_Q_U[/youtube]

As of Friday September 23 2016, i have re uploaded one whit better quality.
 
Hi guys, so we continue the star wars saga by joining all the peaces of Jabba the hut and start painting him.

part 3
[youtube]https://youtu.be/WX3NQO8dmPw[/youtube]
 
Hi guys, in this weeks episode we cool things down a bit by making an air went that will be placed on the wall behind the Jabba figure.

part 4

[youtube]https://youtu.be/muAkVWxB27g[/youtube]
 
Sorry guys, camera angel is way of on this one. So I made it rely fast 4x.

[youtube]https://youtu.be/XoN1pxhsqOE[/youtube]
 
Hi guys, I have been a relay lazy bum these past weeks. But i have finally managed to get in to Photo bucket and uploaded my latest progress picture.

20161027_094218_zpscurct8fu.jpg

I will try and get my thumb out of my, well you know. Some time this week. For right now, I need to paint up the back peace and the air went.
 
OK so i finally got my thumb out of my lazy ass and cut and pasted part 6, witch wasn't that hard.

[youtube]https://youtu.be/_BCPt9dJGCQ[/youtube]
 
In this episode i do some work on what i believe is a fan setup behind Jabba as vel as repainting the thing he sits on.

[youtube]https://youtu.be/E1ISsfMtcxs[/youtube]
 

Latest posts

Back
Top