russian sherman

fightnjoe

i keep turning up....just like a bad penny....
Joined
Jul 10, 2013
Messages
457
yep you read that right.

going to try to stumble through a sherman and mark it up as a russian track.

the kit.

boxart_zps9d3f392b.jpg





joe
 
JohnSimmons said:
Cool! Will this be russian green or olive drab??

this will be most likely olive drab. it is all i have at the moment as most of what i do is us stuff.




joe
 
ok here is the starting point.


remembering the work to this point was done by my son. he could be a talented builder if he wished. he did go on to build several cars but has not done any building in many years.

start-3_zps8e779901.jpg

start-5_zps5d264fe6.jpg

start-4_zpsa3605198.jpg

start-1_zps9b7a638f.jpg

start-2_zps9caa25c4.jpg


and away we have gone. i did some last night but not much. i will update as needed.

also remember i know very little about shermans.


all comments, critiques, and criticism are encouraged.



joe
 
Beauty, got this one bookmarked Joe. Ruck On Brother!!

Cheers, Ski.

P.S. Almost snuck in to flip to bunker "power up" switch, until I had to unload 6 tons of hay, HA! Lawn ornaments can be a drag Bro, if ya know what I mean.
 
steve you better be careful brother. dont want mama unhappy.


well for my first work on this i continued where my boy left off.

he had basically finished the lower hull.

lower-hull-3_zpsa1b803a6.jpg

lower-hull-2_zps95e65551.jpg

lower-hull-4_zps5b89c301.jpg

lower-hull-1_zps99b9ad9e.jpg


so with that in mind i started to work on the upper hull. he had begun the work but didnt seem to go very far.

so off we went.

upper-hull-1_zps46eb3d91.jpg

upper-hull-4_zps8d73cc28.jpg

upper-hull-3_zps0abcee65.jpg

upper-hull-2_zpsf6ba2812.jpg


now that is finished minus the tools. so the next step called for in the instructions is to mate the upper and the lower.

fitted-1_zps7f3ad262.jpg

fitted-2_zps662fe475.jpg

fitted-3_zps51a2fe79.jpg

fitted-4_zpsf50e1d85.jpg


and there we are. next up is the turret.


all comments, critiques, and criticism are encouraged.




joe
 
well dang it this has been an interesting build so far. some stuff just ....................well dont look right.


this update begins with a step back. i was working on the turret and got the barrel together, horrible seam. did a little sanding and then looked to see how it was coming and noticed the barrel was oblong in shape. first i tried to sand it to the right shape, no go.

turret-2_zps094cbd6e.jpg

turret-1_zpse7b55c5e.jpg


with that i figured why not. it isnt like it is the end of the world right.


nah...................i cannot let it stay like that.

before i knew it............

turret-7_zpsa6360a9d.jpg

turret-5_zps9a690ca6.jpg

turret-6_zps2b90071d.jpg


and as you can see i put some putty on the turret. there was a major seam. my sanding removed the molded texture so i tried to mimic what i had seen on how to fix it.

turret-4_zps97878459.jpg

turret-3_zps40786b03.jpg


i know it isnt the greatest but it is what it is.


all comments, critiques, and.............................criticism (might regret that this time) are encouraged.




joe
 
many thanks. now the update.


work commenced to get the texture better.

sanding and more sanding led to this.......


turret-8_zpsab7fd8db.jpg

turret-9_zpsac5e5d44.jpg


better i think.

then construction commenced and was completed on the turret.

turret-10_zps3926779b.jpg

turret-13_zpsaee33211.jpg

turret-11_zpsf4a7ffc1.jpg

turret-12_zpse02ba094.jpg


and that my friends brings the construction of this to a finish i think. at least the destructions dont show anything else but tools and the ma duce left.


with your ok on this i will now move forward with primer.


all comments, critiques, and criticism are encouraged.




joe
 
part 1

not exactly a step by step but this is the process of painting that i am trying to work on.

my first step is to spray flat black over the build. this is rustoleum flat black.

primer-1_zps37084b8f.jpg

primer-2_zpsb21896d2.jpg

primer-3_zpsa99b92a4.jpg

primer-4_zps35fefacb.jpg


the second step of this process is the base coat. for this i used an olive drab from model master. not sure i like the color but it will work for the intended circumstance. to me this is a bit grayer of a tint that i was really looking for.

when i sprayed i tried to cover the interior of each "panel" but i tried to keep away from the edges to keep the shadow integrity.

first-paint-1_zps2a78bf0a.jpg

first-paint-2_zps40001807.jpg

first-paint-3_zpsa30bafba.jpg

first-paint-4_zps81ed8d6b.jpg


now the second part will show the third layer....


all comments, critiques, and criticism are encouraged.



joe
 
part 2

the third layer is the base coat lightened with a lighter color, white, tan, buff, etc. you add drop by drop until you are satisfied with the lightened color. for me i turned to my consistant, rustoleum flat white.

now when i sprayed it i tried to stay in the center of the "panel". i want to keep the shadow and i want to keep further interior to provide more of a faded look.

second-paint-1_zps571a2563.jpg

second-paint-2_zps62fa2a5e.jpg

second-paint-3_zpsafa7d48b.jpg

second-paint-4_zps59ada7f6.jpg


and with a bit of a different light source.

second-paint-5_zps7e31135c.jpg

second-paint-6_zpsbfc5190e.jpg

second-paint-7_zpsaa4a1af5.jpg


now normally i would do a couple of more layers to give it a definite faded look but with the gray tint this looks pretty faded already. i will let this go for a couple of days because i want the paint to cure completely and then i will hit it with future to ready it for decals and then further on, weathering.

all comments, critiques, and criticism are encouraged.


joe
 
john many thanks.


well the decals are on. not many but they seem to be fighting me some.

decals_zpsc41655ad.jpg

decals-5_zps1ad270d5.jpg

decals-2_zps06420833.jpg


the biggest issue is with silvering. seems it just doesnt want to lie down and play nice.

decals-3_zpsa2d86238.jpg

decals-4_zps342854b4.jpg


they have been hit again with decal solvent after using a blade to slice the decal in a few places. we shall see tomorow how they are holding up. i hope they play nice so i can get a gloss on and start on the weathering process.


all comments, critiques, and criticism are encouraged.



joe
 
as this is progressing i wondered how much i would remember of how to do streaks and such with oils.

turns out not so much. i screwed it up.

then i stumbled forward with it and just went with it.


grime and streaks. not too much. just want to give the suggestion.

i started trying to do a pinwash with the oils and ended up screwing the pooch on it. i ended up brushing the oil wash over the entire upper hull and the top parts of the lower hull. i then hit the hull with a few streaks with different colors.

grime-4_zpsca2ee27c.jpg

grime-5_zpsaf5a247f.jpg

grime-2_zps5529fdc6.jpg

grime-3_zps9f0fc5f8.jpg

grime-6_zps14a3c22f.jpg

grime-8_zps572312a8.jpg

grime-9_zps6691c267.jpg

grime-7_zps9f3bb9e1.jpg



with a great sigh i say...

all comments, critiques, and criticism are encouraged.



joe
 
No need to sigh, I think your doing a great job. Looking forward to the finished product!
 
Nice work Joe looks like ya having some fun with this build great results

i thought John would smell this from a mile away ya cant keep him away from a shermie lol ;)

Dan B
 
many thanks to both of you.

well the end is here for this one.

after some self inflicted wounds and some interesting issues thrown at me by the kit i am finished.

my version of this russian sherman is done.

finished-13-Copy_zps3c919b1e.jpg

finished-12-Copy_zpscb3c073f.jpg

finished-14-Copy_zps40a09c1f.jpg

finished-11-Copy_zps226a7542.jpg

finished-10-Copy_zps1bebcbe4.jpg

finished-9-Copy_zpsc92f7fcb.jpg

finished-8-Copy_zps9be6f8e9.jpg

finished-1_zps19610a2e.jpg

finished-2_zps603e53c2.jpg

finished-4_zps96003905.jpg

finished-6-Copy_zps23d4def8.jpg

finished-5-Copy_zpscb4d1ad9.jpg

finished-7-Copy_zpsee1388d5.jpg

finished-3_zps4d696292.jpg


and my favorite picture of the ones i took.

finished-15-Copy_zps22da7322.jpg


i know there are things that are not right with this. i know there are issues that are glaring. i also know that i extended myself just a tad too far with the three builds at once. my mojo has taken a hit with these. may have to see what i can do about that. overall i am happy with this as it served the intended purpose, to work on my painting skills.

oh and btw, i am focused on working with my newish camera for my final shots. all in all i took about 300 shots to try to dial in the camera a little. still some fuzziness in the pictures and i really need to come up with a better "photo booth". but overall these seem better than previous final shots.

what do you think?

all comments, critiques, and criticism are encouraged.



joe
 
I think the build rocks and the pics are nice too! Your mojo should be shooting through the roof!
 

Latest posts

Back
Top