Progress Report on Dragon Sd. Kfz. 251/16

golgotha

New Member
Joined
Oct 15, 2013
Messages
17
Good afternoon,

Although my progress tends to be a little slow at times, it all depends on mood, emotion and motivation.
Today being a good day I thought I should actually put up a progress report on my Dragon Sd. Kfz. 251/16 C Flammenwerfer.

The post shows the 1st spray with dunkelgelb and passes through initial filters and pin washes then some wear and tear, before attaching the 1st side of the lower Hull. I have yet to install the flame gunners seats to each side, once the leather seat pads are made to look a little abused, then the pump and associated piping of the feed system from the large side tanks to the two flame projectors (to be added much later).

Once the current side of the Hull has fully set, I will add the other lower Hull side, before making the floor look like it has seen some use.
There is still lots to do, including assembling two runs of miniscule Dragon Magic single link tracks.

I will feed in on progress as it hopefully goes ever onwards.

John
 

Attachments

  • Dragon_252-16C 001.jpeg
    Dragon_252-16C 001.jpeg
    203.9 KB · Views: 10
  • IMG_20220616_151321-01.jpeg
    IMG_20220616_151321-01.jpeg
    234.1 KB · Views: 10
  • IMG_20220616_151331-01.jpeg
    IMG_20220616_151331-01.jpeg
    106.3 KB · Views: 10
  • IMG_20220616_151340-01.jpeg
    IMG_20220616_151340-01.jpeg
    134.4 KB · Views: 10
  • IMG_20220616_151402-01.jpeg
    IMG_20220616_151402-01.jpeg
    104.3 KB · Views: 9
  • IMG_20220616_151348-01.jpeg
    IMG_20220616_151348-01.jpeg
    113.1 KB · Views: 9
  • IMG_20220616_151323-01.jpeg
    IMG_20220616_151323-01.jpeg
    208.4 KB · Views: 9
  • IMG_20220619_163100-01.jpeg
    IMG_20220619_163100-01.jpeg
    152.4 KB · Views: 9
  • IMG_20220619_163124-01.jpeg
    IMG_20220619_163124-01.jpeg
    132.2 KB · Views: 9
  • IMG_20220619_163159-01.jpeg
    IMG_20220619_163159-01.jpeg
    112.6 KB · Views: 9

CitizenSwift

New Member
Joined
Mar 5, 2013
Messages
19
Thanks for posting. I'm building a 251 as well and I have kinda stalled at painting stage. These pics will help get things going again :)
 
Top