Panzer Kampfwagen IV Ausf.D North Afrika

GaryG64

Well-Known Member
Joined
Sep 8, 2022
Messages
1,715
I've been working on this Panzer build and I'm going to need to encapsulate myself in a mosquito net for all future builds.

I'm being so careful with this part in the grip of my tweezers. Just I am about to reposition it.... ZIP— SWOOOOSSSHH. I could have sworn I heard a sucking sound as I saw the part leave the grasp of the tweezer followed by a low grumbling sinister laughter from within the wall.

My "loosing parts" streak is still going strong! Good thing I have Tamiya on speed dial and saved in my email.
Two contacts are in constant use - my psychiatrist and Tamiya. LOL :D

Pantherman, notice the clean(ish) look to the bench? lol
 

Attachments

  • 20230504_115216.jpg
    20230504_115216.jpg
    503.2 KB · Views: 10
  • 20230504_115229.jpg
    20230504_115229.jpg
    392.9 KB · Views: 10
  • 20230505_141728.jpg
    20230505_141728.jpg
    445.7 KB · Views: 10
  • 20230505_141753.jpg
    20230505_141753.jpg
    440.1 KB · Views: 9
I've been working on this Panzer build and I'm going to need to encapsulate myself in a mosquito net for all future builds.

I'm being so careful with this part in the grip of my tweezers. Just I am about to reposition it.... ZIP— SWOOOOSSSHH. I could have sworn I heard a sucking sound as I saw the part leave the grasp of the tweezer followed by a low grumbling sinister laughter from within the wall.

My "loosing parts" streak is still going strong! Good thing I have Tamiya on speed dial and saved in my email.
Two contacts are in constant use - my psychiatrist and Tamiya. LOL :D

Pantherman, notice the clean(ish) look to the bench? lol
The carpet monster is an ever hungry beast!!
Liking the build so far and the bench is improving, not quite there yet, but improving.
Pantherman
 
Well, when Christi and I move, after I retire, then the bench will be cleared. There isn't a reason a 6'x 2½' should be this cluttered. It would be so daunting to tackle this little room to clean it out right, so... :D
I also have my ducks, Goose, and pheasant mount to relocate in the cleaning process not to mention the hundreds of books (3 large book shelves).
Kind of ready to move to get my new place in order. However, it may never reach the organizational skills of the Pantherman. lol
 
No Scar, this is not your tank. Out of the tank, Scar. C'mon, out.
 

Attachments

  • 20230507_124726.jpg
    20230507_124726.jpg
    260.4 KB · Views: 11
I'm not posting as much with this build but, here are a few.
 

Attachments

  • 20230509_205056.jpg
    20230509_205056.jpg
    468.5 KB · Views: 4
  • 20230509_205104.jpg
    20230509_205104.jpg
    398.8 KB · Views: 4
  • 20230509_205125.jpg
    20230509_205125.jpg
    196.3 KB · Views: 4
  • 20230509_205133.jpg
    20230509_205133.jpg
    166.7 KB · Views: 4
It's mostly assembled other than 2 parts from Tamiya, the bow gun and ball. Weathering to do and some small parts here and there.

Now there is the thought of wanting a half-track to add. If that happens I'll surely need to get Erwin Rommel in the mix. I saw his figure on ebay with some other troops. If I do get the ½ track then I will definitely  need to stop.

Somewhere in the Pacific is a fairly large diorama.
As I picture North Afrika in my head, this diorama will not fit on my shelf and will be my largest one yet. Lots of planning to do.

(The armored vehicle, the motorcycle, the tent and Otto with his radio, several petrol barrels and Jerry cans, a Panzer IV, and now a possible ½ track and more figures.)
Whoa! Put the brakes on Trigger! :D :p
 

Attachments

  • 20230511_004414.jpg
    20230511_004414.jpg
    292.6 KB · Views: 4
  • 20230511_004315.jpg
    20230511_004315.jpg
    257.1 KB · Views: 4
  • 20230511_004302.jpg
    20230511_004302.jpg
    179.8 KB · Views: 5
  • 20230511_004230.jpg
    20230511_004230.jpg
    248.4 KB · Views: 6
  • 20230511_004216.jpg
    20230511_004216.jpg
    416.2 KB · Views: 6
  • 20230511_004206.jpg
    20230511_004206.jpg
    442.5 KB · Views: 5
It's mostly assembled other than 2 parts from Tamiya, the bow gun and ball. Weathering to do and some small parts here and there.

Now there is the thought of wanting a half-track to add. If that happens I'll surely need to get Erwin Rommel in the mix. I saw his figure on ebay with some other troops. If I do get the ½ track then I will definitely  need to stop.

Somewhere in the Pacific is a fairly large diorama.
As I picture North Afrika in my head, this diorama will not fit on my shelf and will be my largest one yet. Lots of planning to do.

(The armored vehicle, the motorcycle, the tent and Otto with his radio, several petrol barrels and Jerry cans, a Panzer IV, and now a possible ½ track and more figures.)
Whoa! Put the brakes on Trigger! :D :p
Go big or go home !!!!!!
Pantherman
 
A little weathering and some decals applied. I'll need to cut around the 813 decals to fit into place... and Scar is at it again.
 

Attachments

  • 20230512_114557.jpg
    20230512_114557.jpg
    421.5 KB · Views: 9
  • 20230512_114623.jpg
    20230512_114623.jpg
    459.2 KB · Views: 9
  • 20230512_114916.jpg
    20230512_114916.jpg
    245.2 KB · Views: 9
  • 20230512_114826.jpg
    20230512_114826.jpg
    275.2 KB · Views: 7
  • 20230512_114856.jpg
    20230512_114856.jpg
    303 KB · Views: 6
  • 20230512_114707.jpg
    20230512_114707.jpg
    446.2 KB · Views: 7
  • 20230512_121106.jpg
    20230512_121106.jpg
    407.6 KB · Views: 7
  • 20230512_120808.jpg
    20230512_120808.jpg
    475.9 KB · Views: 7
  • 20230512_121114.jpg
    20230512_121114.jpg
    313.6 KB · Views: 6
  • 20230512_114810.jpg
    20230512_114810.jpg
    238.8 KB · Views: 7
Im not very good at tracks and it seems my tracks are a bit too rusty for North Africa. I'll have to doctor them where they sit as I glued the idle wheel to the hull and I won't be able to remove the tracks.

Any suggestions on making the tracks better looking?

Of course I still have weathering to do with pigment powders over the tank, maybe the pigment will tone down the bright red color?
 

Attachments

  • 20230515_214125.jpg
    20230515_214125.jpg
    246.4 KB · Views: 8
  • 20230515_214117.jpg
    20230515_214117.jpg
    421.2 KB · Views: 8
  • 20230515_214100.jpg
    20230515_214100.jpg
    306.8 KB · Views: 8
Im not very good at tracks and it seems my tracks are a bit too rusty for North Africa. I'll have to doctor them where they sit as I glued the idle wheel to the hull and I won't be able to remove the tracks.

Any suggestions on making the tracks better looking?

Of course I still have weathering to do with pigment powders over the tank, maybe the pigment will tone down the bright red color?
Maybe a black wash just on the tracks so that some of the red comes through? Sand pigment will cover the bit's your still not happy with?
Pantherman
 
The rusty tracks have been fixed (Thanks Pantherman) and pigments are down to give it that dusty desert look.
I'm hoping to keep as much dust on the tank as possible. I'm thinking of a diluted white glue mist to lock it into place then hit it all with a matt varnish to seal it all in.
 

Attachments

  • 20230516_123058.jpg
    20230516_123058.jpg
    498.9 KB · Views: 12
  • 20230516_123114.jpg
    20230516_123114.jpg
    322.9 KB · Views: 8
  • 20230516_123554.jpg
    20230516_123554.jpg
    418.9 KB · Views: 7
  • 20230516_123600.jpg
    20230516_123600.jpg
    547.3 KB · Views: 7
  • 20230516_123609.jpg
    20230516_123609.jpg
    462.5 KB · Views: 6
  • 20230516_123617.jpg
    20230516_123617.jpg
    559.7 KB · Views: 6
  • 20230516_123651.jpg
    20230516_123651.jpg
    463.8 KB · Views: 11
  • 20230516_124148.jpg
    20230516_124148.jpg
    492.5 KB · Views: 12
The rusty tracks have been fixed (Thanks Pantherman) and pigments are down to give it that dusty desert look.
I'm hoping to keep as much dust on the tank as possible. I'm thinking of a diluted white glue mist to lock it into place then hit it all with a matt varnish to seal it all in.
Looking good. I have tried the PVA mist spray and it didn't go well. Maybe suggest a matt varnish brushed on liberally to bind the dust ?
Pantherman
 
Looking good. I have tried the PVA mist spray and it didn't go well. Maybe suggest a matt varnish brushed on liberally to bind the dust ?
Pantherman
I guess the misting probably would turn to mud... Thanks for the heads up
 
Last edited:
This is a proposed setting.
I'll start the tank crew later.

And Scar finally has a home <3.

Then, of course, try my hand at making the North Africa diorama.
 

Attachments

  • 20230517_162201.jpg
    20230517_162201.jpg
    284.5 KB · Views: 6
  • 20230517_162142.jpg
    20230517_162142.jpg
    356.2 KB · Views: 4
  • 20230517_162107.jpg
    20230517_162107.jpg
    230.6 KB · Views: 4
  • 20230517_162053.jpg
    20230517_162053.jpg
    299.5 KB · Views: 5
  • 20230517_162014.jpg
    20230517_162014.jpg
    224.7 KB · Views: 5
  • 20230517_161927.jpg
    20230517_161927.jpg
    293.9 KB · Views: 8
  • 20230517_161918.jpg
    20230517_161918.jpg
    293.2 KB · Views: 9
  • 20230517_162205.jpg
    20230517_162205.jpg
    332.2 KB · Views: 8

Latest posts

Back
Top