moviekits
New Member
- Joined
- Apr 2, 2014
- Messages
- 43
Hi friends,
After a year, we’re finishing our AT-AT, so it’s time to take the next step. We’ve received lots of petitions asking to make a kit from this model, so we’re using the molds we need for our two AT-AT’s (one for an Endor diorama, one for Hot) for making some extra ones.
We thought it was a good idea to give our molds a better fate, and let the community enjoy one of the most beloved vehicles of Star Wars.
We want you to check the final result; resin hardness, number of pieces and specific configuration of the kit. We’re posting pics and videos to let you decide how worthy it is here: http://www.scalemodeladdict.com/SMF/index.php/topic,11218.15.html
For more information, mail us to [email protected] or use our contact page at http://moviekits.net
And a couple of videos showing how this model is articulated:
https://www.youtube.com/watch?v=jl_1-9dUdtk
https://www.youtube.com/watch?v=7Hza5WV-7SI
Pieces: 183
Retractable cannons*: 3 pieces each one.
Size: 16" (39 cm.) tall X 20" (51 cm.) long.
Included:
- 16 naval modeling screws for the leg's surface.
- 4 naval modeling screws for the ankles.
- 4 naval modeling screws for the clavicles.
- 16 hinges.
Material: all resin.
Neck tube: corrugated aluminium 40mm section.
For the painting job, we’ll post every step of the process in this site, so you can get an idea of how to handle it.
--> The AT-AT kit doesn't include: screws for thighs, knees and belly, hinges and batteries for the lightning circuit. By the way, the model needs common stuff you'll find in any hardware store. We expect the lightning circuit to be a 5 LED lights circuit.
* Retractable main cannons: the Master model comes with retractable main cannons. They can’t be casted in resin due to subsequent erosion so we need to buy, build and balance them separate. We’ve decided not to include them in the regular kit but, if you’re intererested in getting those retractable cannons, we can do it for you for an extra charge of 54 USD (2 cannons).
We’ll cast it on demand and for a short period of time, so it will be a very limited edition, keeping some extra resin for a few future casts.
Those of you who have seen our past projects should know how perfectionist and involved we try to be. Since this is our first public project, we want everything to be perfect so, undoubtedly, every delivery will have a tracking number and we’ll guarantee the reception of every single piece we have promised to give you.
As this will be a limited edition, we’ll accept order requests during the months of August and September through our email moviekits AT moviekits.net or contact form.
We’d like to thank you for all the contributions made by the community. Without this, our work wouldn’t have been possible.
After a year, we’re finishing our AT-AT, so it’s time to take the next step. We’ve received lots of petitions asking to make a kit from this model, so we’re using the molds we need for our two AT-AT’s (one for an Endor diorama, one for Hot) for making some extra ones.
We thought it was a good idea to give our molds a better fate, and let the community enjoy one of the most beloved vehicles of Star Wars.
We want you to check the final result; resin hardness, number of pieces and specific configuration of the kit. We’re posting pics and videos to let you decide how worthy it is here: http://www.scalemodeladdict.com/SMF/index.php/topic,11218.15.html
For more information, mail us to [email protected] or use our contact page at http://moviekits.net
And a couple of videos showing how this model is articulated:
https://www.youtube.com/watch?v=jl_1-9dUdtk
https://www.youtube.com/watch?v=7Hza5WV-7SI
Pieces: 183
Retractable cannons*: 3 pieces each one.
Size: 16" (39 cm.) tall X 20" (51 cm.) long.
Included:
- 16 naval modeling screws for the leg's surface.
- 4 naval modeling screws for the ankles.
- 4 naval modeling screws for the clavicles.
- 16 hinges.
Material: all resin.
Neck tube: corrugated aluminium 40mm section.
For the painting job, we’ll post every step of the process in this site, so you can get an idea of how to handle it.
--> The AT-AT kit doesn't include: screws for thighs, knees and belly, hinges and batteries for the lightning circuit. By the way, the model needs common stuff you'll find in any hardware store. We expect the lightning circuit to be a 5 LED lights circuit.
* Retractable main cannons: the Master model comes with retractable main cannons. They can’t be casted in resin due to subsequent erosion so we need to buy, build and balance them separate. We’ve decided not to include them in the regular kit but, if you’re intererested in getting those retractable cannons, we can do it for you for an extra charge of 54 USD (2 cannons).
We’ll cast it on demand and for a short period of time, so it will be a very limited edition, keeping some extra resin for a few future casts.
Those of you who have seen our past projects should know how perfectionist and involved we try to be. Since this is our first public project, we want everything to be perfect so, undoubtedly, every delivery will have a tracking number and we’ll guarantee the reception of every single piece we have promised to give you.
As this will be a limited edition, we’ll accept order requests during the months of August and September through our email moviekits AT moviekits.net or contact form.
We’d like to thank you for all the contributions made by the community. Without this, our work wouldn’t have been possible.
