Luke V2 variation on my V3.

BenHobbie

New Member
Joined
Aug 1, 2015
Messages
344
Reaction score
0
Realy wanted to have a V2 type on my belt to go to the theater ;D

Specs ::)

- PRIZM 3.5 by Plecter Labs.
- 18650 panasonic 3400mah battery.
- 2W Bass speaker.
- Tri Cree R/G/Rb mounted in the emiter.
- 3D printed multi parts chassis.
- 3D printed speaker module.
- Redone emiter section.
- Acid weathering.
- Paint weathering.
- Hot flamme weathering on the copper section.
- D-ring.
- Custom cone knob.
- Screw.
- Custom bladeplug.
- Activation and aux switch under circuit board.
- Modified pommel insert.
- Modified clamp with vintage lever assembly.
- 2.1 recharge port.
- Internal RICE port.
- Custom bladeplug.
- Fake crystal chamber via orange 5mm Led on 3D printed chassis.
- Fake and real cosmetic rust.

Pics 8)






























MTFBWYA ;)
 

BenHobbie

New Member
Joined
Aug 1, 2015
Messages
344
Reaction score
0
Thanks :D

This one also have sound I will shoot a video today ::)
 

BenHobbie

New Member
Joined
Aug 1, 2015
Messages
344
Reaction score
0
Thanks I added a green LED to go allong the orange in the fake crystal chamber 8)

I did that because my main blade color is green due to the fact it's basically a luke saber now ::)

I also change the 2W Bass speaker with a brand new one because this 2 last day I noticed a difference in the sound and the sound volume and in fact the speaker was damaged :-X

Now it's back to max loudeness and in fact I have to set the sound volume on 3 to 4 because other way it's to loud at home :p

The speaker is monted on the batery chassis and it receive air from a lot of spot so it's realy loud to much for my taste in full volume in fact, at least in close area :-\

I will upload videos and pics tomorow ;D
 

BenHobbie

New Member
Joined
Aug 1, 2015
Messages
344
Reaction score
0
And here is the video ;)

[youtube]https://youtu.be/xHwgu-CedSw[/youtube]
 

BenHobbie

New Member
Joined
Aug 1, 2015
Messages
344
Reaction score
0
;)

[youtube]https://www.youtube.com/watch?v=cSj6SClnf4A&feature=youtu.be[/youtube]
 
Joined
Sep 25, 2011
Messages
804
Reaction score
0
Did you 3D print the parts yourself? What printer do you use for 3D printing?

Looks wonderful!
 

BenHobbie

New Member
Joined
Aug 1, 2015
Messages
344
Reaction score
0
Designed it but shapeway print it for me ;)

Only internal chassis parts are 3D printed the hilt itself is all alluminium and steal ;)
 

Latest posts

Top