Iron Man - Dragon 1/9th
- Thread starter WebbyNZ
- Start date
It seems so long ago that the idea for this one arrived in my crazy mind.
Dual 1/9th builds in the iron man theme
So into the figure I go. Great detail on the ches plates etc but the internal frame will be the fun part of this one
Also had to do some mods on the limbs as well, wires need to somewhere.
Even the hands which were made of a softer plastic so will be inetresting getting light through here.
A button LED in the chest and some 'light transporters' means there is light at the end of the tunnels.
There is a sold piece supplied for the arc reactor so lets try moulding one from craft glue
Unfortunatley this is when my camera packed up :-/
Dual 1/9th builds in the iron man theme
So into the figure I go. Great detail on the ches plates etc but the internal frame will be the fun part of this one
Also had to do some mods on the limbs as well, wires need to somewhere.
Even the hands which were made of a softer plastic so will be inetresting getting light through here.
A button LED in the chest and some 'light transporters' means there is light at the end of the tunnels.
There is a sold piece supplied for the arc reactor so lets try moulding one from craft glue
Unfortunatley this is when my camera packed up :-/
So photos now with camcorder :-/
Arc reactor cover came out ok, will made a more solid one for the finished kit.
Same 'light transporters used to give him some eyes
Nice bright LED into cheat to supply light to the hands and eyes via light transporters.
Holes in the torso frame required for wiring actually easier than I first thought.
Test fit looking good so far
Wires through leg and feet and first mount on base.
Test fit with the rest of the panels on. Paint is getting close
Arc reactor cover came out ok, will made a more solid one for the finished kit.
Same 'light transporters used to give him some eyes
Nice bright LED into cheat to supply light to the hands and eyes via light transporters.
Holes in the torso frame required for wiring actually easier than I first thought.
Test fit looking good so far
Wires through leg and feet and first mount on base.
Test fit with the rest of the panels on. Paint is getting close
bdr65
" Ouch, Cut me finger again "
- Joined
- Feb 9, 2013
- Messages
- 320
Looks awesome all lit up........... ;D
Yay, new camera time and I can upload directly to photobucket over wifi from the camera.
Switch mounted in base
First coat is Vallejo Metallic Black (wireds make a great way to hang while drying)
Than its a coat of Alclad Mirror Gold for Lexan (spoon tests were done to make sure there were no paint reactions)
Base gets a coat of diorama texture paint
First coat of Alclad Candy Red (ill be buying more of these candy colours)
Face on and im happy with the colours
Time to get the silver parts
Gold is on and he is on the base
And with the Iron Man themed bike
Switch mounted in base
First coat is Vallejo Metallic Black (wireds make a great way to hang while drying)
Than its a coat of Alclad Mirror Gold for Lexan (spoon tests were done to make sure there were no paint reactions)
Base gets a coat of diorama texture paint
First coat of Alclad Candy Red (ill be buying more of these candy colours)
Face on and im happy with the colours
Time to get the silver parts
Gold is on and he is on the base
And with the Iron Man themed bike
LrdSatyr8
Member
- Joined
- Dec 21, 2012
- Messages
- 765
That came out looking awesome my friend! Both of them!
Grendels
Active Member
- Joined
- Nov 24, 2009
- Messages
- 9,092
Nice looking!
Biskup
New Member
- Joined
- Aug 27, 2010
- Messages
- 1,876
Looks way better then the bust I'm painting now 
Quaralane
Well-Known Member
- Joined
- May 22, 2009
- Messages
- 11,262
Some excellent work on both of these.
Nice masking on both
Nice masking on both
