Reply to thread

This one escaped me all together here.

  Good evening everyone.

I built one altogether different, and not to hi-jack a thread by

Any means. Maybe some help.

  The concern with melting is fair enough. Here's the tip.


Plastic starts to get funky at about 120*F This is the lower

End of sondes zone, your mileage maybe different. At

140*F your done.

  To safeguard or at least to check your temps, what you

need is what we used to call a 'pulp thermometer' is used. The

reason is, they are adjustable. Place in a glass of ice H20 and

they should read 33*. If not adjust the nut on the back.

  These are the ones with the upper scale that may go to

200-250*F anything above that and we are roasting duck

and not drying paint. Lol.


Back
Top