Reply to thread

Message

Good evening all.
Still playing with the 3D Printer.
In a subject somewhat suited for the coming season I've picked on another 3D printed subject.
A 1/20 th scale T-Rex skeleton.
She is about 1m snout to tail, and consists of ~ 200 pieces. This is at 50% of the original model size.

[ATTACH=full]83876[/ATTACH]

I have put a lot of hours in printing bones and more bones over the last couple of weeks. and I'm about half way through the printing process.

[ATTACH=full]83877[/ATTACH]

Here are some of the skeleton that has been printed and some assembly.

[ATTACH=full]83878[/ATTACH]

[ATTACH=full]83879[/ATTACH]

[ATTACH=full]83880[/ATTACH]

[ATTACH=full]83881[/ATTACH]

[ATTACH=full]83882[/ATTACH]

[ATTACH=full]83883[/ATTACH]

[ATTACH=full]83884[/ATTACH]

[ATTACH=full]83885[/ATTACH]

[ATTACH=full]83886[/ATTACH]

[ATTACH=full]83887[/ATTACH]

[ATTACH=full]83888[/ATTACH]

[ATTACH=full]83889[/ATTACH]

[ATTACH=full]83890[/ATTACH]

[ATTACH=full]83891[/ATTACH]

[ATTACH=full]83892[/ATTACH]

Will start on the seam work after all the printing and sub assemblies are done.
Spent Thursday at the ROM in Toronto taking reference pics of their T-Rex, as again no assembly drawing. Will have to depend on anatomy references to construct this.

Thank you for following.
Question and comments welcome.

Jim

165 Words

<blockquote data-quote="Papermodder" data-source="post: 200465" data-attributes="member: 12832">Good evening all.&nbsp;Still playing with the 3D Printer.In a subject somewhat suited for the coming season I&#039;ve picked on another 3D printed subject.A 1/20 th scale T-Rex skeleton.She is about 1m snout to tail, and consists of ~ 200 pieces. This is at 50% of the original model size.[ATTACH=full]83876[/ATTACH]I have put a lot of hours in printing bones and more bones over the last couple of weeks. and I&#039;m about half way through the printing process.[ATTACH=full]83877[/ATTACH]Here are some of the skeleton that has been printed and some assembly.[ATTACH=full]83878[/ATTACH][ATTACH=full]83879[/ATTACH][ATTACH=full]83880[/ATTACH][ATTACH=full]83881[/ATTACH][ATTACH=full]83882[/ATTACH][ATTACH=full]83883[/ATTACH][ATTACH=full]83884[/ATTACH][ATTACH=full]83885[/ATTACH][ATTACH=full]83886[/ATTACH][ATTACH=full]83887[/ATTACH][ATTACH=full]83888[/ATTACH][ATTACH=full]83889[/ATTACH][ATTACH=full]83890[/ATTACH][ATTACH=full]83891[/ATTACH][ATTACH=full]83892[/ATTACH]Will start on the seam work after all the printing and sub assemblies are done.&nbsp;Spent Thursday at the ROM in Toronto taking reference pics of their T-Rex, as again no assembly drawing. Will have to depend on anatomy references to construct this.&nbsp;Thank you for following.Question and comments welcome.&nbsp;Jim</blockquote>

[QUOTE="Papermodder, post: 200465, member: 12832"] Good evening all. Still playing with the 3D Printer. In a subject somewhat suited for the coming season I've picked on another 3D printed subject. A 1/20 th scale T-Rex skeleton. She is about 1m snout to tail, and consists of ~ 200 pieces. This is at 50% of the original model size. [ATTACH=full]83876[/ATTACH] I have put a lot of hours in printing bones and more bones over the last couple of weeks. and I'm about half way through the printing process. [ATTACH=full]83877[/ATTACH] Here are some of the skeleton that has been printed and some assembly. [ATTACH=full]83878[/ATTACH] [ATTACH=full]83879[/ATTACH] [ATTACH=full]83880[/ATTACH] [ATTACH=full]83881[/ATTACH] [ATTACH=full]83882[/ATTACH] [ATTACH=full]83883[/ATTACH] [ATTACH=full]83884[/ATTACH] [ATTACH=full]83885[/ATTACH] [ATTACH=full]83886[/ATTACH] [ATTACH=full]83887[/ATTACH] [ATTACH=full]83888[/ATTACH] [ATTACH=full]83889[/ATTACH] [ATTACH=full]83890[/ATTACH] [ATTACH=full]83891[/ATTACH] [ATTACH=full]83892[/ATTACH] Will start on the seam work after all the printing and sub assemblies are done. Spent Thursday at the ROM in Toronto taking reference pics of their T-Rex, as again no assembly drawing. Will have to depend on anatomy references to construct this. Thank you for following. Question and comments welcome. Jim [/QUOTE]

Verification