Aoshima Super Oversize Thunderbird 2 (Completed)

Looking good. Nice Eagle in the background, too.
Thank you, I'm getting back into the swing of things as I was busy over the festival holidays with work.

Update:

Spent the day cleaning up some bits and placing the decals, since my last painting attempt went south with the masking tape pulling up my paint work I thought I'd may as well try the decals.

Decals went on quite good with only one tear with the stripe on the undercarriage which was easily fixable, everything was going fine with no hiccups until dun dun dunnnnn... I had placed one of the 2's on upside downside :oops:

After fixing that I ran into another issue with the decals, the 'Thunderbird' lettering is out of scale, way too big as a matter of fact and I don't like it, I think I'll remove it and try printing my own.

TB2-32.jpg

Had a quick test of the legs and the pod in position.

TB2-33.jpg

Thanks for looking :cool:
 
Hey guys, small and simple update with my bird, my printer ink arrived and after setup and alignment yadda yadda I did a couple of test runs (about 6 sheets of A4) for scale sizing, when I was finally happy with the sizes I printed out my designs which I've set aside to dry for 48hrs.

I printed on white decal sheet and since my inkjet doesn't print the color white I outlined my lettering with the base color of my TB2, the print come out better than I expected and the green outline is a very close match to my base color, my question is, has any one used Microscale Decal Film to seal decals? do you guys have any favorites or recommendations that will seal decals and prevent ink from running or smearing?

I have a spray can of Testors clear gloss lacquer top coat which I was going to use but Microscale Decal Film kept popping up in the conversation in the Gerry Anderson Facebook group.

I'm in the final stages of this beast and I've actually been sitting back admiring how much I've put into this particular kit with scratch building and lighting it's interior and the many modifications, I'm honestly going to miss messing around with this model.

TB2-34.jpg

Thanks for looking.
 
Had to remove the original kit decals of the number 2 on the rear tailplane for the clear bits had frosted up after they dried, weird, luckily I made some custom replacements.

First stage of weathering done, clear coat to seal in my work, it looks shiny :D

Almost near completion.

TB2-41.jpg

Cheers :cool:
 
dfe2f949ac268c04c5f4739adab9a45a.gif
 
Home stretch... My resized decals turned out better than hoped for with minimum ink run, I used a green sharpie around the edges before I soaked the decals just so they weren't left with a white outline, speaking of colors, the color match on the decal sheet wasn't perfect but it was a close match, I'm hoping a flat coat will even that out a bit.

I used two scale sized sets of decals, one slightly smaller than the main set, I followed reference for the main placements and also applied some extra decals in places I thought looked cool.

A couple more things to do then I can call this project complete.

TB2-44.jpg

TB2-43.jpg

Thanks for looking.
 
Finally calling this project done, it's been a challenge in both the kit and the time itself to complete it.

I'm happy how this turned out considering it was only meant to be an out of box build but gradually developed into something else, I'm pleased with how the lighting turned out but it could've been better if I spent more time with the wiring and electrics.

The paint turned out well but could've been better in some area's and I did get a little impatient with rushing the job as I peeled the paint off during one of the masking stages... the replacement decals did the job nicely but I could've printed the non white pieces on clear decal sheet but instead I chose not too only because I wanted to save time and not waste decal paper.

Been a fun and frustrating model to modify and detail and would I ever think of building another of the same kit? that'll be a no no.

Well, enough talk, here's some pics, and again excuse my shite smartphone camera photo's.

Thanks for your guys support and commenting during this project, cheers.

TB2-47.jpg

TB2-51.jpg

TB2-49.jpg


TB2-48.jpg

TB2-50.jpg

TB2-52.jpg
 
Last edited:
I just love the weathering!!!!!

Do you mind if I share some of your pics in a FB French sci-fi modelers group?
 
I just love the weathering!!!!!

Do you mind if I share some of your pics in a FB French sci-fi modelers group?
Sure, I don't mind at all, share away :cool:

Thanks for all your kind comments, it's been very satisfying seeing this build come to fruition, I'm happy how she has turned out.

I have a stash of Gerry Anderson kits that require special attention, I think I'll start my Thunderbird 5 as my next project as I've already gone through the sprues and she looks like an easy oob build but in saying that, you all know by now that I never do stick to the plan and I'll probably end up detailing that kit too, I think it'll look awesome with lighting :D

Cheers guys and happy modelling!
 
Really nice job on the paint and finish, not to mention the lighting and weathering..ok the whole thing looks awesome..Well Done!
Cheers
 

Latest posts

Back
Top