1966 Ford Mustang 350GT R Finished

fightnjoe

i keep turning up....just like a bad penny....
Joined
Jul 10, 2013
Messages
457
Well folks I needed something to fill between build commitments.

This is the subject.

85-2874_zpsah3b5b12.jpg

I will be posting some spru shots very soon.



Joe
 
Re: 1966 Ford Mustang 350GT R

The spru shots.

Actually Pretty good detail with this one.



Spru-5_zpsgf4rjkmg.jpg
Spru-2_zpsddymvigy.jpg
Spru-3_zpsbyzapurw.jpg
Spru-4_zps22wgypdn.jpg
Spru-1_zpsshwaixbt.jpg


And the decals.

Decals-1_zpsznnooczr.jpg

And to be honest I have begun. I have begun the painting of the body.



Joe
 
Re: 1966 Ford Mustang 350GT R

The first two layers of the painting.

First was a layer of Testors Gloss Black. Once dry I sanded it out a bit with 1000 grit to get some of the blemishes to minimize. I then sprayed Alclad Polished Aluminium to give it a "metal" base layer.

Paint-2_zpsdobgstc1.jpg
Paint-1_zpsc23x03zq.jpg

After this I went with the first color. Model Master Enamel Artict Blue Metal Flake. I will allow this to dry then I plan to move into sanding out some of the blemishes that have occured. I will then hit it with another coat. I plan to build up the paint and then on to clear.



All comments, critiques, and criticism are encouraged.



Joe
 
Re: 1966 Ford Mustang 350GT R

The body has color.

The color is Model Master Artic Blue Metal Flake.

Paint-4_zps5etggyxt.jpg
Paint-3_zpsiniic2gr.jpg

Decals are now also on. They are setting up and I will have pictures soon.



All comments, critiques, and criticism are encouraged.



Joe
 
Re: 1966 Ford Mustang 350GT R

The decals went on ok.

All things considered though if faced with the same situation I would paint them on. As it is they are on and have been glossed. I was planning to polishing this up but I believe I will just leave it. It has a decent shine to it and looks pretty good.

So here are pics of the decals.

Decals-10_zpsodbdfgsz.jpg
Decals-9_zpsele6i2nt.jpg
Decals-8_zpscpae0wih.jpg
Decals-7_zpszcxsxmgf.jpg
Decals-6_zpsisezcjeb.jpg
Decals-5_zpsc7j1wqtt.jpg
Decals-4_zpsmcvmohdn.jpg
Decals-3_zps6gzzckkh.jpg
Decals-2_zpsiv98yoxg.jpg


With those now done I can begin to work on the actual stuff in the instructions.


All comments, critiques, and criticism are encouraged.


Joe
 
Re: 1966 Ford Mustang 350GT R


The decals look really good from here .
Sounds like you had some trouble with them ?
 
Re: 1966 Ford Mustang 350GT R

Many many thanks.

I did have some issue with the decals. Some appeared to be short for the area they were to be applied. Some were much too long. No worries though. Got through it.



Joe
 
Re: 1966 Ford Mustang 350GT R

A small update.


The under parts and the interior tub get some paint and a bit of drybrushing. Semi Gloss Black, Model Master Metalizer Stainless Steel, and then Testors Flat Aluminium.

Bottom_zpsa7cp4pgj.jpg
Seat-2_zpspp44kxjt.jpg
Seat_zpsjqaz23gu.jpg

Next will be detail work on the under parts and such.


All comments, critiques, and criticism are encouraged.



Joe
 
Re: 1966 Ford Mustang 350GT R

Well after a bit of a lengthy break I am back.

Work continues on the Mustang with engine work, chassis work, and work on the interior. Trying my hand at wiring the engine again. Hope it works better than the last time.

Chassis-1_zpsnzdtnkia.jpg
Interior-1_zpszojrbe8b.jpg
Dash-1_zps1jkmihy3.jpg
Engine-2_zpsongkowhi.jpg
Engine-1_zpsivnoe0lj.jpg

Next up is to finish with the plug wires and assorted wires and cables.

Til the next time.


All comments, critiques, and criticism are encouraged.



Joe
 
Re: 1966 Ford Mustang 350GT R

We have a rolling chassis. The engine is now installed as well.

Chassis-2_zpsmgkvx1ap.jpg
Chassis-3_zps8qcjjugq.jpg
Engine-4_zps4pmu81br.jpg
Engine-3_zpso1nfdu8v.jpg

Next is to mate the body to the chassis.


All comments, critiques, and criticism are encouraged.



Joe
 
And she is finished.

All told it turned out much better than the first time I did up this kit.

finished-7_zpsm7zcbjwd.jpg
Finished-6_zpsypwvstdu.jpg
Finished-5_zpspvznfk6j.jpg
Finished-4_zpsl6q3aljp.jpg
Finished-3_zpsbjc8vr3z.jpg
Finished-2_zps4jgq5w5g.jpg
Finished-1_zpsbcvdwsdx.jpg


Next up will be a couple of things that will test me to no end.


All comments, critiques, and criticism are encouraged.



Joe
 

Latest posts

Back
Top