Thank you everyone so much for your comments and for visiting
Still have pain, but, by cricky we are gunna finish this thing with or without pain.
The wrist has its limitations but i am adapting well to my new situation.
But
On ward my friends
PIX
Hope you have all recovered from my action shots.
Filled with bondo......
[ATTACH=full]76707[/ATTACH]
Three, everything is three at the mo......
[ATTACH=full]76708[/ATTACH]
Sanded......
[ATTACH=full]76709[/ATTACH]
Three........main engine bodies
[ATTACH=full]76710[/ATTACH]
Covered the outsides and sanded all nice like
[ATTACH=full]76711[/ATTACH]
Started molding the outer rings, inner and outer are the same
[ATTACH=full]76712[/ATTACH]
Now we're doin eights
[ATTACH=full]76713[/ATTACH]
Marked
[ATTACH=full]76714[/ATTACH]
Rough cut
[ATTACH=full]76715[/ATTACH]
Four, yes four inner walls
[ATTACH=full]76716[/ATTACH]
Glued inner wall to outer inside ring, i think.....only one this time......to test
[ATTACH=full]76717[/ATTACH]
Cut bottom bit off
[ATTACH=full]76718[/ATTACH]
Moved on next to the inner workings of the engine, lights and sum such.....
1,000,000 watt LED spot light, i plan to use a dimmer.....i think.
[ATTACH=full]76719[/ATTACH]
Cut hole in tube with cap to hold 1,000,000 watt LED bulb
[ATTACH=full]76720[/ATTACH]
So......
[ATTACH=full]76721[/ATTACH]
[ATTACH=full]76722[/ATTACH]
[ATTACH=full]76723[/ATTACH]
1 million watts, watch your eyes people
[ATTACH=full]76724[/ATTACH]
Dry fit in the main engine body
[ATTACH=full]76725[/ATTACH]
[ATTACH=full]76726[/ATTACH]
Cut support for outer wall
[ATTACH=full]76727[/ATTACH]
dry fit.......again
[ATTACH=full]76728[/ATTACH]
Very rough sketch of detail positions
[ATTACH=full]76729[/ATTACH]
Dry fit.............again
[ATTACH=full]76730[/ATTACH]
Hole saw action
[ATTACH=full]76731[/ATTACH]
Hole by saw
[ATTACH=full]76732[/ATTACH]
Final Dry fit
[ATTACH=full]76733[/ATTACH]
Thats the story so far
Definately more to come
Still making it up as i go
Hope you are having as much fun as me
Its good to be back in the groove baby
Gagster
OUT
