Search results

  1. Deadman Disciple

    Citroen DS3 WRC 1/24 Decals help.

    What PC programs would up-size those without blurring?
  2. Deadman Disciple

    Citroen DS3 WRC 1/24 Decals help.

    Hi guys, been a while since I posted last. But I need some help. I recently bought a Heller 1/24 Citroen DS3 WRC Kit & I wanted to put some aftermarket decals on. Namely, the livery from the 2015 season that Citroen changed half-way through the season from Rally...
  3. Deadman Disciple

    Really? Yet another Bandai X-Wing.

    https://www.youtube.com/watch?v=kz9AVeYxkrQ Its finale time on the X-Wing. Started applying all the decals one-by-one on the top of the x-wing, once all done I Microsoled them & left them to dry. I then sealed them in Revell Matt Clear & once dried I started work on the...
  4. Deadman Disciple

    Really? Yet another Bandai X-Wing.

    Re: Bandai 1/72 X-Wing Fighter My Citadel Agrax Earthshade is a dark brownyish wash & I used that along with the black wash to dirty up R2. I also have some rust wash which might help too. Cheers for that. Wayne
  5. Deadman Disciple

    Really? Yet another Bandai X-Wing.

    https://www.youtube.com/watch?v=85xMiaxD3n4 Well its been a while since my last model, so im starting my next kit, this time the Star Wars 1/72 X-wing from Bandai. My wife bought me this along with the AT-ST last christmas for £16 each. I started with the rear wing assemblies, very easy to...
  6. Deadman Disciple

    Exploration Sets-Trek and Galaxy Quest

    A cracking job there Patrick. You have taken what little you had & turned into something special. You would never know the toy phaser was a toy after what you did to it. Talking Trek weapons, I did ponder getting the resin phaser rifle from First Contact a few years ago, until my wife saw the...
  7. Deadman Disciple

    Revell 1/24 Jordan EJ-10 Formula 1 Car.

    https://www.youtube.com/watch?v=SLFPRxQkZR8 Back again with the next project, this time the Revell 1/24 Jordan EJ10 from the 2000 Formula 1 season. As there is only 2 & a bit sprues to this kit, I decided to primer & with my Halford glass black & Humbrol No.69 Yellow spray the parts...
  8. Deadman Disciple

    Warp Speed Mr. Sulu, Revell 1/500 STID USS Enterprise

    Re: Revell 1/500 JJ'Prise https://www.youtube.com/watch?v=5qB3rRy5OmU Its finale time on the Enterprise. I started by finishing off the nacelles by applying the various markings on top of the aztecs. At the front I applied the very thin line markings, being very gentle so they...
  9. Deadman Disciple

    Warp Speed Mr. Sulu, Revell 1/500 STID USS Enterprise

    Re: Revell 1/500 JJ'Prise https://www.youtube.com/watch?v=W7GSwBbc7qw This part is now solely about the warp nacelles. I started getting them ready for primer by masking off all the clear parts. Using normal household masking tape for the domes, making sure every nook & cranny was sealed so...
  10. Deadman Disciple

    Warp Speed Mr. Sulu, Revell 1/500 STID USS Enterprise

    Re: Revell 1/500 JJ'Prise https://www.youtube.com/watch?v=3YK0NkPmzl0 Its time to get ready for aztecing. But first I started with the markings on the bottom of the saucer which have to be painted on. I bought some Tamiya 87177 (2mm curved masking tape) after seeing a recommendation thread...
  11. Deadman Disciple

    Warp Speed Mr. Sulu, Revell 1/500 STID USS Enterprise

    Re: Revell 1/500 JJ'Prise Ive started on the aztecs, they had the feel of very thin film. They have gone down really well so far, after I patted them down with some damp kitchen towel to smooth out the creases & bubbles. Half down, the other half to go. Wayne
  12. Deadman Disciple

    Warp Speed Mr. Sulu, Revell 1/500 STID USS Enterprise

    Re: Revell 1/500 JJ'Prise Thanks Patrick. Pulling off the maskol on the bigger clear parts is easy, but on those small windows was very niggly & it was a pain. Should ok when applied to the nacelles, as those clear parts are a lot bigger.
  13. Deadman Disciple

    Warp Speed Mr. Sulu, Revell 1/500 STID USS Enterprise

    Re: Revell 1/500 JJ'Prise https://www.youtube.com/watch?v=M7wG_A_eEEM Finishing off the main part of construction by glueing the saucer to the secondary hull, I nursed the neck & its holding pins into the saucer. Took a few mins to get it to lock 100%, then held it down the best I could with...
  14. Deadman Disciple

    1:350 Klingon BOP

    Ive been wanting one these for ages. This looks fantastic, what color green did you use? Im hoping when I finally get mine, I can find a single shade of green in a rattle can, as ive read that some people mix their greens & airbrush it on, as I dont own an airbrush. A brilliant result there...
  15. Deadman Disciple

    Warp Speed Mr. Sulu, Revell 1/500 STID USS Enterprise

    https://www.youtube.com/watch?v=X0CaTVTZfv4 Moving on with my next build, this time the Revell 1/500 USS Enterprise from Star Trek: Into Darkness. I bought this model from the toy fair at Birmingham NEC in June 2015, it was an absolute bargain at £10. The only thing wrong with it was that...
  16. Deadman Disciple

    'ere, what ya mean Pratmobile. Del Trotter Ford Capri.

    ::) The outer box that you get your microwave pizza in, I just cut a flap off the box and used it to mount my licence plate onto. Because the card is very thin, but sturdy.
  17. Deadman Disciple

    'ere, what ya mean Pratmobile. Del Trotter Ford Capri.

    Re: Del Boy Ford Capri https://www.youtube.com/watch?v=fXKaMuh2EFc Well, Delboy's Capri is finished. Ive started by lining up the 3 pinstripes on each side using the pinstripe decals I bought from Kitform Services, then I discovered the pinstripes wern't long enough. So I had...
  18. Deadman Disciple

    My 1/25 Batman v Superman Batmobile build...

    Absolutely brilliant, that has turned out really great. Looking at an unboxing video on YT & the box is 5-1/2 inches thick, thats a lot of sprues. Tell me, what did you spray the Batmobile in? As on the guide it just says "dark gun metal" Nice one, Wayne.
  19. Deadman Disciple

    'ere, what ya mean Pratmobile. Del Trotter Ford Capri.

    https://www.youtube.com/watch?v=uTrnfTGz6Aw After a year & a half, ive finally stopped my wife from nagging me & found a Ford Capri model kit to convert into a Del Boy Ford Capri from Only Fools & Horses. Picking up a pre-built Monogram Ford Capri II kit from a seller on ebay, whilst taking it...
  20. Deadman Disciple

    Removing old dried on glue.

    Ive sanded as much as i can, but the glue remains. The lenses are flat on the inside, im going to silver wash the outside to try & disguise the glue.
Top